EuroHarmony Community Forums
Archive => EuroHarmony VA => Old Forum => Announcements => Topic started by: EHM-0948 Bruno on January 26, 2005, 02:09:25 am
-
Hi,
If you are having problems with the cockpit of the VFA Fokker 70 to use on training, then please download this file :
Cokcpit Patch (http://www.euroharmony.com/site/patch.zip)
Inside this patch you will find 2 directories. Copy the files to each respective directory inside your FS directory. The panel file goes inside the aircraft/your-fokker-70/panel and the other go to the "Gauges" directory.
This happened because the "panel.ini" file was created using gauges that are not named with the gauges from the Project Fokker.
Another thing, i am not sure if this will work. I found this at 2am after a post message from a pilot.
One thing is sure. If can always download the Fokker project from here (http://fokker.avsim.net/downloads.htm) and after that, just copy the "PF10070-panel" directory contents directly inside to your "panel" directory on your Fokker.
Hope that this will help. It helped me.
Also You can try to just copy the textures of the Fokker 70 to the current EuroHarmony Fokker 70.
/Gergely
Regards,