Level D 767-300 textures

[EHM-1908 Steve]

Could someone explain how to install the Level D Euroharmony textures.It is a self extracting file that does not place the files in such a way that the repaint manager can use them.:%

[EHM-1328 Willem]

To install EHM livery  copy  and paste the texture directory (Aircraft\LVLD_B763\texture) rename the copy of texture to  texture.EHM , and copy  de new livery .bmp files from EHM over the existing files in this directory.

Then open the aircraft.cfg file in notebook, and add the following lines after the last flitsim

• (just before the part [General]. and replace xxxx to whatever the next sequential number in the [fltsim.x] series is.

[fltsim.xxxxx]
title=B767-300ER
sim=B767-300
model=
panel=
sound=
texture=EHM
kb_checklists=767LVLD_CHECK
kb_reference=767LVLD_REF
atc_id=PH-EHM
atc_airline=Euroharmony
atc_flight_number=1121
ui_type=Class 6
ui_manufacturer=Euroharmony
ui_variation=Level-D Simulations
description=Boeing 767-300ER, configured for a long haul flight\n\nDry Operating Weight -\t197000 lb (89359 kg)\nMax Allowable TO Weight -\t408000 lb (185068 kg)\nTotal Zero Fuel Weight -\t244976 lb (111120 kg)\nMax Allowable Fuel Weight -\t161000 lb (73029 kg)


Regards Willem,  EHM1328

[EHM-1908 Steve]

Thanks Willem

I tried that but it still does not show up

[fltsim.0]
title=Level D Simulations B767-300ER
sim=B767-300
model=
panel=
sound=
texture=
kb_checklists=767LVLD_CHECK
kb_reference=767LVLD_REF
atc_id=C-WLPE
atc_airline=Level D Simulations
atc_flight_number=1121
ui_type=767-300ER
ui_manufacturer=Level-D Simulations
ui_variation=Level-D Simulations
description=Boeing 767-300ER, configured for a long haul flight\n\nDry Operating Weight -\t197000 lb (89359 kg)\nMax Allowable TO Weight -\t408000 lb (185068 kg)\nTotal Zero Fuel Weight -\t245126 lb (111188 kg)\nMax Allowable Fuel Weight -\t161000 lb (73029 kg)


[fltsim.1]
title=Level D Simulations B767-300ER - JGA
sim=B767-300
model=
panel=
sound=
texture=jga
kb_checklists=767LVLD_CHECK
kb_reference=767LVLD_REF
atc_id=C-WLPE
atc_airline=Level D Simulations
atc_flight_number=1121
ui_type=767-300ER
ui_manufacturer=Level-D Simulations
ui_variation=JGA
description=Boeing 767-300ER, configured for a long haul flight\n\nDry Operating Weight -\t197000 lb (89359 kg)\nMax Allowable TO Weight -\t408000 lb (185068 kg)\nTotal Zero Fuel Weight -\t245126 lb (111188 kg)\nMax Allowable Fuel Weight -\t161000 lb (73029 kg)




fltsim.2]
title=B767-300ER
sim=B767-300
model=
panel=
sound=
texture=EHM
kb_checklists=767LVLD_CHECK
kb_reference=767LVLD_REF
atc_id=PH-EHM
atc_airline=Euroharmony
atc_flight_number=1121
ui_type=Class 6
ui_manufacturer=Euroharmony
ui_variation=Level-D Simulations
description=Boeing 767-300ER, configured for a long haul flight\n\nDry Operating Weight -\t197000 lb (89359 kg)\nMax Allowable TO Weight -\t408000 lb (185068 kg)\nTotal Zero Fuel Weight -\t244976 lb (111120 kg)\nMax Allowable Fuel Weight -\t161000 lb (73029 kg)

[fltsim.3]
title=[DXT3] Level D Simulations B767-300ER - Varig
sim=B767-300
model=
panel=
sound=
texture=varig_dxt3
kb_checklists=767LVLD_CHECK
kb_reference=767LVLD_REF
atc_id=PP-VOI
atc_airline=VARIG
atc_flight_number=1121
ui_type=767-300ER DXT3 Textures
ui_manufacturer=Level-D Simulations
ui_variation=Varig
description=Boeing 767-300ER, configured for a long haul flight\n\nDry Operating Weight -\t197000 lb (89359 kg)\nMax Allowable TO Weight -\t408000 lb (185068 kg)\nTotal Zero Fuel Weight -\t245126 lb (111188 kg)\nMax Allowable Fuel Weight -\t161000 lb (73029 kg)


[General] etc etc

Can you see any problems with the config ?

[EHM-1328 Willem]

Steve,


its not in the standard Level-D simulation Aircraftmanufactory

You can find it in de Aircraft manufactory  Euroharmoney,Aircraft model Class 6.

and remember texture=EHM  is case sensitive.

Regards, Willem EHM1328

[EHM-1908 Steve]

O.K. Sorted

but the only way i could get it to work was to overwrite the Level D textures with the Euroharmony textures then alter the config so the aircraft shows under Euroharmony.
A long way around but got there in the end.
Thanks for your help Willem

[EHM-1001 Robert]

Doh !!! Doh !!! Doh !!!

1. Installation instructions are always attached to every aircraft/ livery package ! You do not need to only click OK-OK-OK, you can read the --- I M P O R T A N T --- section too

2. It was superb as you inserted it, you only forgot the first [ sign from the [fltsim.2] header, and that was the problem...the sim did not find your aircraft. You do not need to delete any textures. The [fltsim.xxx] sections are only links, so you can make more planes from 1 installed folder. If the [fltsim.xxx] sections are typed correctly, the airplane will pop-up in the selection menu.

[EHM-1908 Steve]

DOH DOH and double DOH :$

I just went back to check the installation file and yes it was there right in front of me (full instructions)
I was so attracted to the alluring NEXT button that i just had to press it.

Note to self READ ALL instructions before making a pratt of your self