Author Topic: European Flight Sim hardware suppliers  (Read 12134 times)

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« on: May 05, 2005, 08:39:59 am »
Here's a topic that is for those of us that like to take our hobby a little more seriously by using additional hardware to simulate the less obvious controls.

Specifically, I would like to solicit opinions on GoFlight panel suppliers within Europe along with online contact details.

To start with, my opinion of the "official" UK supplier of GF hardware, [ RC Simulations ], is that anyone in the UK thinking of buying anything from these people is urged to avoid them; simply put they are hideously overcharging for import products (practically dollars-to-pounds, when the exchange rate on PayPal is $1.86 to £1). On a product like the VMAX yoke, RC want you to pay £500. If you get it direct from VMAX in the States you'll pay $549! Even if you are unlucky enough to get hooked by customs (and there are some simple techniques you can follow to make this less likely) for import duties and VAT, you'll still be saving money. Also, they are very slow in keeping up with GF - the GF ATC panel and rudder pedals have been available for months now (at least 6 months), yet RC still are not listing either of them, even for pre-order.

I give them 1 out of 5.
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

Anonymous

  • Guest
European Flight Sim hardware suppliers
« Reply #1 on: May 05, 2005, 09:49:35 am »
i only just got serusly involed in flight sim, i live in the uae, but i flying bak to uk soon for ahoilday. do you know a realy cheap shops that sell hardware? i mean real cheap !!

liam

----------------------------------------------------------------------------------------------
email me the things dont poast here!! email me on im_still_mad1221@hotmail.com
-----------------------------------------------------------------------------------------------

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #2 on: May 05, 2005, 12:36:07 pm »
Come on folks, I really can't do this thread by myself...

A European shop this time (as recommended by Dimitris Pantoleon on the GoFlight Forum) - [ SimWare ]

Based in Belgium, and according to Dimitris a good supplier. Their prices seem to be fair, and they have some really great looking hardware...

As a treat for all the other Boeing fanboys (and girls) out there - [ A USB 737 throttle quadrant ]! And only €3,100.00
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

EHM-1365 Benjamin

  • Guest
European Flight Sim hardware suppliers
« Reply #3 on: May 05, 2005, 01:10:18 pm »
Lol, only!

They have a lot of good stuff on there...it is a real shame about the prices (well I suppose they are fair....just that it's way out of my priceband). My wish-list forms...

And for those of you who havn't watched this video....you will be speechless!
http://www.home-cockpit.com/civile/videocockpit.wmv
(File size is rather large - but over 22mins of video)

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #4 on: May 05, 2005, 03:37:44 pm »
Only question I have is "is it servo'ed already, or would I have to splash out on a servo set as well to have it do true auto-throttle?"

;D
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

EHM-1365 Benjamin

  • Guest
European Flight Sim hardware suppliers
« Reply #5 on: May 05, 2005, 05:54:47 pm »
I'd stick with a budget if I were you and not have it move like that:%

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #6 on: May 05, 2005, 06:23:24 pm »
Hehehe - no guts, no glory Ben...

The auto-throttle hardware (not the quadrant itself, I must hasten to add) is actually pretty cheap and dead easy to control.

Have a look at [ http://www.phidgetsusa.com/fs/auto_throttles_guide.asp ]
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

EHM-1281 Cyriel

  • Guest
European Flight Sim hardware suppliers
« Reply #7 on: May 05, 2005, 07:04:20 pm »
I recently looked into this. I was a bit surprised by the prices however! I will need to save a lot of money first:[

EHM-1365 Benjamin

  • Guest
European Flight Sim hardware suppliers
« Reply #8 on: May 05, 2005, 07:09:27 pm »
Hey Murray,

How much do you think that one he has made costs? If he says all out of ever-day material, can't be that much :P

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #9 on: May 05, 2005, 07:55:39 pm »
Quote
Originally posted by EHM-1365
Hey Murray,

How much do you think that one he has made costs? If he says all out of ever-day material, can't be that much :P


Depends on how much you feck up making your prototypes ;D
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

EHM-1365 Benjamin

  • Guest
European Flight Sim hardware suppliers
« Reply #10 on: May 05, 2005, 08:52:00 pm »
Hehe....guess we are in the 10s of  thousands with me at it :]

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #11 on: June 03, 2005, 09:37:04 am »
Wee, looks like I *am* going to have to build this thread myself...

In my browsing round the intarweb I came across [ Luchtvaart Hobby Shop ] (link goes to their Flight Simulation section). They claim to be huge (and just looking quickly through their FS section, I am inclined to believe them).

They are located in The Netherlands, their pricing seems fair for GoFlight stuff (same as every other European supplier I have seen, somewhere close to $ to €) and their P&P costs are very reasonable (only want €10 to ship the very heavy GoFlight rudder pedals to the UK!)
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

Offline EHM-1507 Manuel

  • Super cruise
  • *****
  • Posts: 251
  • Karma: 0
European Flight Sim hardware suppliers
« Reply #12 on: June 04, 2005, 08:46:34 am »
Well, I found out this site on the aerosoft - website, perhaps It´ll be interesting

http://www.aerosoft.com/shop-re_s/control_units.html

Greets!


Manu
Manuel Zwikirsch

EHM 1507


Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #13 on: June 14, 2005, 12:51:30 pm »
Nice one Manu - danke...
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

Offline EHM-1358 Tim

  • Intergalactic!!
  • ********
  • Posts: 1,192
  • Karma: 0
European Flight Sim hardware suppliers
« Reply #14 on: June 14, 2005, 07:35:22 pm »
http://www.flightstore.co.uk

I got my stuff from there! Very nice!

Offline EHM-0654 Murray

  • Administrator
  • Intergalactic!!
  • ***
  • Posts: 4,531
  • Karma: 5
  • VA Management
    • The Ponderings of PMUK
European Flight Sim hardware suppliers
« Reply #15 on: June 15, 2005, 10:14:11 am »
Quote
Originally posted by Tim
http://www.flightstore.co.uk

I got my stuff from there! Very nice!

The thread was supposed to be for GoFlight suppliers, but what the heck...

I've been using [ TransAir ] for the more real-world stuff I've been purchasing recently (my 737NG FMC Guide, and my 737NG Cockpit Companion came from TransAir). They have a shop at Shoreham Airport, BTW...
Murray Crane // EHM-0654 // Twitter
VA Management

KEEP CALM AND CARRY ON

 

anything