Airbus A330 problem

[EHM-1921 Ivan]

Whenever I start with the a330, I start with a crash. The front wheel sinks... Don't know how to fix it... Can anyone help?

[EHM-1651 Christian]

mmm, try reinstalling it??

[EHM-1921 Ivan]

I reinstalled it 3 times and still the front wheel sinks...

[EHM-1633 José]

ummm, that happened to me as well with the old Fokker 70, and the B-738 V2.:!

[EHM-1798 Conrad]

Does it happen at all airports? or just one or two?

[EHM-1921 Ivan]

Hm... I haven't tried it yet on other airports... Usually when I take a plane for the first time I take a short flight between Varna and Burgas...
But the strange thing is that after it crashes 1 time, it restarts and it is normal..

[EHM-1633 José]

To me, this has happened anywhere. But it only happens the first time you load the flight.:%

[EHM-1821 Javier]

Hi,

I had the same problem before but i figured it out yesterday.

in the A330 CFG file, you can scroll down to the [contact points] section, there are 2 sets, one is used only.

below that set, there is another bigger set of points with "//" in front of it.

put "//" on the first set and remove the "//" from the second set, that way, the front gear would be stronger as i tested in my FS.

I tested it at my home airport WSSS, as my scenery for WSSS is quite complex, when i change from cockpit/VC to Tower or Spot view, the plane "jumps" and "bumps" for a good long 30 seconds.

Before i editted the CFG, the plane, as you all have, crash on the start. But now the gear holds out fine;D

[EHM-1001 Robert]

Wow, at least I have a clue too, how to fix that, because I never had that error, but will remove the bug from the plane.